temperature chamber - Climate chamber – Amtest, test and measurement

Calorimetric test chamber for materials testing

Materials require intensive temperature testing to help optimize production processes, improve quality, and meet required safety standards. More

Fingerprint development cabinet (FDC) – CrimeEvent

The CrimeEvent environment simulation cabinet has been developed to quickly develop and visualise fingerprints using 1,8-Diazafluoren-9-one (DFO) and ninhydrin processes. More

Rain chamber / Leak testing system

In particular, many electrical components have to be permanently water- tight, as they must work reliably even under the most adverse weather conditions. Test a wide variety of test specimens as to their tightness. More

Test system for lithium-ion energy storage systems

Alternative drive systems are a central component of the automotive future. We work together with you to exactly tailor our li-lo test systems of the weisstechnik® and vötschtechnik® brands to your test conditions. More

F-Gases and Environmental Protection

Our new products do not only comply with the current regulations, but can be used for their entire product life without retrofits – of course with the same performance. More

EmissionEvent, Fape test cabinets

By way of the so-called Fape test, the subsequent formaldehyde emission from construction materials can be detected and its concentration can be determined. More

WBT Material testing temperature chambers for different materials

Bricks, clinker bricks, stone or tiles are often exposed to wind and weather for decades without protection. In order to guarantee long-term quality and to permanently protect buildings, the materials are subject to intenssive temperature tests. More

Temperature vacuum cabinet

Testing aerospace equipment before the first flight into space is a requirement in order to be able to predict the behavior of these valuable components. They are tested by simulating space conditions. More

Vacuum test chambers VTH and VCH / WT-D and WK-D

Aaircraft must resist extreme temperature fluctuations and humidities in vacuums. It is therefore important to test these highly stressed components for quality and durability before use. More

Test cabinets for ozone resistance tests – OZ

Using the WT/WK-OZ test cabinets you can find out the ozone resistance of your products. For this purpose, the product is subjected to an ozone concentration of 25 to 200pphm at +40°C and 55% relative humidity. More

Global-UV test unit – Global UV3 200

Staggered simulations of natural weathering in devices always requires a restriction of the number of climate values or their cyclic alterations. The Global-UV test unit simulates the most important climate factors which are relevant for ageing. More

Test rigs for vehicle air conditioning

In order to optimally reproduce the vehicle architecture, we offer integrated or modular conditioning units on the basis of conventional or alternative refrigerants. More

Walk-in chambers, ClimeEvent

Thanks to the modular system, the Walk-in chamber ClimeEvent can be configured quickly and easily. The wide range of options enables us to meet your individual needs. More

Airbag test system

Our temperature chamber for pre-regulating the temperature of airbag modules combines a temperature setting chamber with an automatic travelling system for airbag modules on a rail system with a drive unit. More

Test Rigs for engine cooling systems

Test rigs for engine cooling systems allow the high precision and fully reproducible simulation of the complete air and fluid area with the integration of all relevant supply modules for charge air, engine oil, gear box oil and coolants. More

New test system for motor developers to reduce nitrogen oxide emissions

Weiss Technik has now developed the world's first AdBlue temperature control unit for fuel-filling tests, to test its use under reproducible conditions, to gain insights relevant for series production. More

Engine Test Rigs – Automotive solutions from Weiss

Our test equipment meets all extreme environmental requirements, the integration of safety devices, and the realization of high level automation in order to achieve efficient and reproducible test results. More

F-gas regulation, entered into force EU wide

Since 01.01.2017 the transition period for refrigerant circuits with a charge < 3kg is expired, for this reason all refrigerant circuits with an CO2 – equivalent > 5t a leak check has to be carried out. More

Regulation of fluorinated greenhouse gases (EU) No. 517/2014

Document of fluorinated greenhouse gases (EU) No. 517/2014 provides information on the contents of the Regulation, its impact on operators and our current activities and recommended action. More

VDT Dust test chamber according to standard SAE J575

According to state-of-the-art manufacture the test cabinets are of a modular design and are ready to be installed. The whole system is designed to be used under extreme conditions and guarantees reliable functioning and a long service life. More

Test systems for energy storage

To test their reliability, lithium batteries are subjected to various tests in the field of environmental simulation. These tests are carried out in temperature change test cabinets or climatic test chambers. More

Temperature and climate chambers for material test benches

Weiss Technik series ETE / EKE offers a range of temperature and climate cabinets, specially designed for almost every tensile test bench in the market. More

Photostability test chambers in accordance with the ICH Guideline Q1B options 2

The Vötsch photostability test chambers VP 250-L and VP 500-L have an ideal light, temperature and humidity distribution and is thus able to simulate reproducible light and climatic conditions. More

Walk-in test chambers for stability testing according to ICH Guideline Q1A

The extremely accurate and reliable stability test chambers of Vötsch Industrietechnik can be validated and are designed specifically to help you meet the requirements of the ICH Guideline Q1A. More

Stability testing according to ICH Guideline Q1A

The exceptional build quality, innovative product features, accuracy and smart controls allow for the safest and easiest stability testing. VP series 280, 280-T, 600, 600-T, 1300, 1300-T, 2000, 2000-T pharma test chambers. More

Photostability testing according to ICH Guideline Q1B

Vötsch photostability testing cabinets (VP Series 250-L, 250-LT, 500-L, 500-LT) offer innovative product features, high accuracy, intelligent controls and an exceptional build quality. More

Stability Testing – GMP and FDA compliant reliable solutions for the pharmaceutical Industry

In the ICH Guideline Q1B the methods for performing photostability tests are established with an irradiation dose of 1.2 million lxh and an integrated UV part of 200 Wh/m2. More

VT 3050 Pharma temperature test chamber

The VT 3050 Pharma is the alternative to a -20 °C freezer as well as usuable for freeze thaw cycles and temperature stress test. More

VT Temperature test chambers with the ideal class for laboratories

VT Series temperature test chambers with the ideal performance range for constant and cyclic temperature tests. The relation of external dimensions, test space volumes, efficiency and operating costs are excellent. More

Renting test chambers cost effectively and with short delivery times

A large variety of Weiss-C series test chambers with wide temperature and moisture range are available for delivery within 2 to 3 weeks in a cost-saving renting construction. More

Temperature test chamber WT 

The temperature test chambers of the WT series are both highly effective and economical. They are equipped with everything which is required to perform cold-heat tests in extreme ranges complying with the relevant standards. More

Touchpanel testing with a climate chamber WK BM1000 – VIDEO

The WK BM 1000 represents the first complete solution in the form of a combined measuring robotic and climate test chamber ... More

ESS stress screening chambers and cabinets, HALT/HASS test systems

Manufacturing companies use environmental stress screening, during which products are subjected to extreme heat fluctuations, to explore where an electronic device’s weak points are quickly. More

AmtestLab – Product testing

The Amtest-TM laboratory performs environmental simulation tests. Products are tested for reliability and quality in almost all product categories. More

Testing equipment for rent – Environmental test chambers and shakers

You can make the decision making process of your developers and investors easier, facilitate sales agents' business activities and earn your customers' trust. Take a look at the list of our test equipment available to let (download data sheets). More

Used test equipment trade – purchase – sale

List of AmtestLab's second-hand test equipment for sale More

About us

Our company is in the business of distribution of high-precision measuring instruments and testing equipment in the Central European region. More

SIMPAC advantages of web and software packages

The new SIMPAC Control Software is one of the most user-friendly control programs available.The design and functionality of S!MPAC is such that it allows users to spend minimal time on the complexities of programming and to concentrate on the test. More

SIMPATI e-Sign captures biometric data based on your handwriting

The consistent solution from electronic documentation of measurement values through to the delivery of electronic documents to the authorities. More

WEISS control system – Software SIMPATI

We provide our Software SIMPATI* for collecting, editing, evaluating and managing your measured values. More

List of remote control solutions

Weiss applications allows for easier and time-saving operation of testing equipment. Integrated administration routines increase the reliability of the equipment. More

Climate chambers (WK 3100) WK3 3100-H – Reproducible qualification tests in fast motion – VIDEO

Reproducible qualification testing of solar and photovoltaic units in WK 3100 climate chambers that are particularly suitable for solar and photovoltaic module testing due to their high construction design and spacious interior. More

SIMPATI simulation package for test system integration

The system control software SIMPATI enables optimum operation of your environmental simulation and oven systems for performing tests in the fields of research, development and production. More

Walk-In test chambers – Product range

It is your choice … Sufficient space for large-sized test objects – walk-in temperature and climate test chambers. More

Weiss environmental protection

By means of comprehensive energy optimization the efficiency also of your systems and processes can be significantly increased – we are at your side to assist you. More

First climate test chamber WK BM1000 with integrated measuring robotic system

This climate test chamber can be used for function-dependent component tests under extreme climatic conditions and with rapid temperature changes in testing and production. More

Climate chambers for laboratories and production processes – Product list

Return on investment and convenience are the main factors that come into play when deciding to bring test chamber equipment in house instead of relying on outside testing facilities, benefits. More

New generation climate test chambers for stability tests on pharmaceutical products

Pharma 600 / 600T, Pharma 1300 / 1300T, Pharma 2000 / 2000T  – 3rd Generation. More

WTL/WKL – Temperature and climate test chambers for use in laboratories

Reproducible temperature and climate tests can be performed directly at your workplace. This is possible with the WTL and WKL chambers of Weiss. This series was specifically developed for use in laboratories. More

Photo-stability test chamber 500-L

The photo stability test chamber Pharma 500-L is characterized by an ideal light, UV, temperature and humidity distribution and can thus guarantee absolutely reproducible light, UV and climatic conditions. More

Walk-In pharma test chambers

Stability test chambers by Weiss Umwelttechnik can be validated and are designed specifically to meet your requirements. More

Pharmaceutical test chamber

The Weiss pharmaceutical cabinet series has been specially developed to meet the requirements of test laboratories in the pharmaceutical industry. More

Vacuum test chamber with integrated vibration 

Our climate chambers allows for test specimens to be subjected to vacuum and vibration tests across the aerospace industry. More

Climate test chamber with moveable vacuum system 

This vacuum tank can be integrated in a temperature or climatic chamber of the WT/WK series for occasional performance of vacuum tests. More

Temperature and climate vacuum test chamber WT-D/WK-D 

The vacuum-temperature and vacuum-climate test chambers WT/D and WK/D enable reproducible tests of highly stressed components in the aviation industry. More

Vacuum test chamber – Product range

Whether space shuttles, airplanes or helicopters: when in use, these systems are subjected to the most radical situations, such as extreme changes in temperature up to vacuum states in outer space. More

E-WK I – Scientific measures and product testing

Emissions of Volatile Organic Compounds (VOC) from materials and products can be determined under precise test conditions.  More

Fape +60 and Fape +60x2 – Formaldehyde test device 

Detecting invisible dangers pursuant to EN 717-2 across automotive and processing industries. More

Hermetically sealed emission test chambers – Product range

The goal of emission tests is to detect and determine the concentration of undesirable substances, which are released by materials and components of all kinds. These tests have become standard in contemporary safety assessment and quality control. More