Rain chamber, leak testing system

Rain chamber / Leak testing system

In particular, many electrical components have to be permanently water- tight, as they must work reliably even under the most adverse weather conditions. Test a wide variety of test specimens as to their tightness. More
Solar simulation chambers SunEvent

Solar simulation chambers SunEvent

With the Weiss Technik solar simulation chambers SunEvent, you can simulate the effect of sunlight, temperature, and humidity on the properties and the service life of your products. Reproducible, certified, and under accelerated conditions. More

Ozone resistance Test cabinets

Test cabinets for ozone resistance tests – OZ

Using the WT/WK-OZ test cabinets you can find out the ozone resistance of your products. For this purpose, the product is subjected to an ozone concentration of 25 to 200pphm at +40°C and 55% relative humidity. More

PV Test chambers

Test chambers for photovoltaic modules (PV)

The test chambers with an extra wide or high interior test space allow you to test for suitability and service life with temperature changes, moisture/frost or moisture/heat constellations according to IEC 61713, IEC 61215 and IEC 61464. More

Global UV3 200 test unit

Global-UV test unit – Global UV3 200

Staggered simulations of natural weathering in devices always requires a restriction of the number of climate values or their cyclic alterations. The Global-UV test unit simulates the most important climate factors which are relevant for ageing. More

AirEvent test chambers, Weiss Technik

Air pollutant test chamber, type AirEvent

AirEvent – Air pollutants such as sulphur dioxide, nitrogen oxide, hydrogen sulphide and chlorine are emitted through stationary combustion in the industry, by power stations, traffic and agriculture. More

Solar simulation cabinets, Vötsch

Solar simulation cabinets – Global irradiation, temperature, and humidity

With the Wötsch Technik solar simulation chambers you can simulate the effect of sunlight, temperature, and humidity on the properties and the service life of your products. More

Dust test chamber VDT, Vötsch

VDT Dust test chamber according to standard SAE J575

According to state-of-the-art manufacture the test cabinets are of a modular design and are ready to be installed. The whole system is designed to be used under extreme conditions and guarantees reliable functioning and a long service life. More

ST, Dust test chamber

ST – Dust test chamber

Dust tests are mainly performed to test functioning of electronic components under extreme environmental conditions. Various standards specify e.g. the test duration and the composition of dust used. More

ST1000, dust test chamber

Dust test chamber ST1000


The ingression of dust into enclosures is tested. The systems can be equipped with an underpressure device so that the dust not only settles on the entire specimen but can also ingress into the specimen. More

ST2000, dust test chamber

Dust test chamber ST2000


Having the same functionality as ST 1000 but larger in size, this chamber allows for the functional and dust protection testing of specimens using air saturated with dust particles More

 SWT, spray, splash water test chamber

SWT – Spray and splash water testing equipment

For performing tests for testing of the protection of housings against ingress of water. Thanks to the integrated circulation equipment, water consumption can be reduced to a minimum. More

SWT200-400
, splash water test chamber

Splash water test chamber SWT200/400


Ingression of water into enclosures is tested. In conjunction with a timer, the test cycle can be automated with a settable test time of 3 sec. to 30 h. More

SWT600-800, splash water test chamber

Splash water test chamber SWT600/800

Having the same functionality as SWT 200/400 but larger in size, this test chamber allows for the testing of water intrusion volume for each specimen. Optional accessories are available for this test chamber. More

Reproducible, qualification tests in fast motion, climate chambers, WK-3100, Weiss

Climate chamber WK3 3100-70-5 H

Climate chambers WK3 3100-70-5 H are especially suited for environmental tests of solar and photovoltaic modules with their high construction and available space volume More

BSB, WK climate chamber

BSB – Climate test chambers for noxious gas test

To analyse corrosion processes impact of noxious gases systematically, test systems are necessary, in which the corrosion-promoting noxious gas concentrations and climates can be adjusted according to the standards. More

WK111-180-Oz, ozone test chamber

Ozone test chamber WK3 180-0-OZ

High acceptation for Ozone-Resistance-Tests by rubber-containing specimen! Embrittlement by the use of Ozone-admission. Beginning with fissures, proceeding destruction of the specimen. More

Global-UV test unit for weathering tests

Global UV testing systems

Systems for the simulation of exposure of plastic material to temperature, climate, rain or acid rain in conjunction with global radiation in the spectral range from 290 to 450 nanometres. More

Wheater simulation test chamber

Weathering and IP test chambers – Product range

Solar, UV, ozone, dust, spray and splash water, gas, noxious gas and IP test chambers for environmental simulation product testing. More